Mazda CX-9 Owner's Manual page 274

CX-9_8CM9-EA-12I_Edition1 Page274
Thursday, September 13 2012 2:36 PM
Interior Comfort
Climate Control System
NOTE
In the position, the air conditioner is
automatically turned on and the
automatically selected to defrost the
windshield. In the position, the
mode cannot be changed to the
qOperation of Automatic Air
Conditioning
1. Press the AUTO switch. Selection of
the airflow mode, air intake selector
and amount of airflow will be
automatically controlled.
2. Use the temperature control dial to
select a desired temperature.
Press the DUAL switch or turn the
front passenger temperature control
dial to control the set temperature
individually for the driver and front
passenger.
Cold
To turn off the system, press the OFF
switch.
6-10
Form No.8CM9-EA-12I
NOTE
Setting the temperature to the maximum
l
mode is high or low will not provide the desired
temperature at a faster rate.
When selecting heat, the system will restrict
l
mode. airflow until it has warmed to prevent cold
air from blowing out of the vents.
qWindshield Defrosting and Defogging
Press the windshield defroster switch.
In this position, the
automatically selected, and the air
conditioner automatically turns on. The
air conditioner will directly dehumidify
the air to the front windshield and side
windows (page 6-5). Airflow amount will
be increased.
Set the temperature control to the hot
or warm position when defogging (
position):
Hot
Using the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious
accident.
Black plate (274,1)
position is
WARNING
position with the