Practical Connections; Remote Control Connection - Marantz M-CR502 DAB User Manual

PRACTICAL CONNECTIONS

REMOTE CONTROL CONNECTION

• The REMOTE IN jack is intended for connecting devices equipped with a remote control connector such
as a Marantz DVD player.
• The unit can be controlled using the remote sensor of a Marantz DVD player connected to the unit. Be
sure to set "IR=DISABLE" when controlling in this way.
Remote control
Marantz DVD player
Note:
When making this remote control connection, be sure to set the remote control switch, located on the rear panel
of the device that is connected to the unit, to INT..
Remote control
switch
SETTING THE REMOTE CONTROL
3. 2.
ENGLISH
1.
Put the power of the unit into standby
mode.
2.
Turn on the power while holding down the
7 button.
3.
Select "IR=DISABLE" using the 1/2 buttons
and then press the ENTER button.
• The unit cannot be controlled using the
remote controller while "IR=DISABLE" is
set.
• To restore original settings, repeat Steps
1. 2.
and , select "IR=ENABLE" and
press the ENTER button.
17