Connecting The Am/Fm Antennas - Marantz M-CR502 DAB User Manual

Cd
Table of Contents

Advertisement

ENGLISH
BASIC CONNECTIONS

CONNECTING THE AM/FM ANTENNAS

Outdoor FM antenna
Outdoor DAB antenna
FM antenna
CONNECTING THE OUTDOOR ANTENNAS
Poor reception may sometimes be improved by
installing an outdoor antenna.
CONNECTING THE OUTDOOR FM ANTENNA
Notes:
• Install the antenna away from noise sources (such
as neon signs, roads with heavy traffi c, etc.)
• Install the antenna away from power lines,
transformers, and other electric power
equipment.
• Always ground the antenna to prevent damage
from lightning and electric shock.
8
DAB antenna
AM loop antenna
Outdoor
AM antenna
CONNECTING THE OUTDOOR AM ANTENNA
Notes:
• Do not disconnect the AM loop antenna.
• Always ground the antenna to prevent damage
from lightning and electric shock.
CONNECTING THE SUPPLIED ANTENNAS
CONNECTING THE SUPPLIED FM ANTENNA
Be sure to use the supplied FM antenna indoors.
To use, extend and adjust the antenna's positioning
until clear reception is achieved.
Use push pins or other such implement to secure
the antenna in the location with the least noise.
CONNECTING THE SUPPLIED DAB ANTENNA
Be sure to use the supplied DAB antenna indoors.
Adjust the antenna up and down to optimize
reception (see TUNING AID on page 27). Fix to a
location such as a window frame or wall with tape
or push pins.
CONNECTING THE SUPPLIED AM ANTENNA
Be sure to use the supplied AM loop antenna
indoors.
Orient the antenna in a position that allows clear
reception.
Place the antenna as far as possible from the unit,
TV, speakers, and electric cords.
1.
Push down the levers on the AM antenna
terminals.
2.
Insert the stripped leads of the antenna
wire into the antenna terminal.
3.
Release the levers.
Note:
Connect the GND wire (black) of the shielded cable
to the GND terminal of the AM antenna.
ASSEMBLING THE AM LOOP ANTENNA
1.
Unwind the antenna wire.
2.
Bend the stand in the opposite direction.
3.
Insert the hook at the bottom of the loop
into the groove in the stand.
4.
Place the antenna on a stable surface.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-cr502

Table of Contents