Controls, Connections And Indicators - Marantz CD Player User Manual

CONTROLS, CONNECTIONS
AND INDICATORS
Please read the following instructions referring to the illustration on page
122.
FRONT
POWER switch
Press to switch power ON, and press again to switch OFF.
DISC TRAY
Place a disc with the label side up.
REMOTE SENSOR
This window receives signals transmitted from the remote control unit.
Display
Shows information such as the power ON/OFF state, track number,
playing time and current operation mode.
RNDM PROG EDIT A – B RPT
DISC TTL TRK INDX
TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
TIME/TEXT information
Shows the time information when an ordinary music CD is played,
and shows the text information when a CD-TEXT compatible disc
is played.
TEXT (CD-TEXT) indicator
Lights up when a CD-TEXT compatible disc is loaded.
Track number indicator
When a disc is placed on the tray and the tray is closed, the TOC*
is read and the numbers of all the tracks on the disc are displayed
" " lights up if there are more than 20 tracks on the disc. In
program mode only the track numbers of the programmed tracks
light up.
The track numbers go out in turn as each track finishes playing.
* TOC is the disc's "Table Of Contents" and contains non-audio
data such as the track numbers and playing times of all the tracks
on the disc.
Output level indicator
Shows the analog output level as a relative reference.
DISC indicator
Blinks during TOC readout.
TTL (Total) indicator
Lights up when the total number of tracks in a disc is displayed.
RNDM (Random) indicator
Lights up in the random play mode.
PROG (Program) indicator
Lights up in the programming or delete programming mode.
TRK (Track) indicator
Lights up when the track number being played is displayed.
EDIT indicator
Lights up when the player is in edit mode.
A-B indicators
Both indicators light up in the A-B repeat mode or one of them
lights up during playback of tape side A or B in the edit mode.
INDX (Index) indicator
Lights up when the index number being played is displayed.
1
PEAK TTL TIME
RPT (Repeat) indicators
RPT: Lights up during all-track repeat mode, which plays all the
tracks on the disc repeatedly. Also lights up during program
repeat mode, which plays all the programmed tracks repeatedly.
RPT 1: Lights up during 1-track repeat mode, which repeatedly
plays a single track repeatedly.
PEAK indicator
Lights up during peak search, and flashes during playback of the
peak.
(Pause) indicator
Light up in the pause mode.
TTL (TOTAL) indicator
Indicates the remaining playing thme of the entire disc. In program
mode, this indicator shows the remaining playing of the current
program.
(Play) indicator
Light up during CD playback.
TIME indicator
Lights up in the time display mode.
PHONES Jack
Jack for connecting headphones.
EDIT button
Press to engage the editing function, which helps record a disc onto a
tape by playing the tracks according to the tape length and leaving a
non-recorded blank of 4 seconds between every track.
, (Track Previous/Next) buttons
When the button is pressed during playback, play re-starts at
the beginning of the current or a previous track. When the
is pressed, play re-starts at the beginning of the next or a subsequent
track.
Hold down or
backward or forward direction.
The selected track number is shown on the display.
These buttons can also be used to select a desired track from which to
start playback.
These buttons are also used in program mode to select tracks for
programming.
STOP button
Press to stop playback. This button is also used for deleting a program.
button
PAUSE
Press to interrupt playback temporarily. The indicator lights up during
pause. When pressed again, the indicator goes out and playback
resumes from the same position.
button
PLAY
Press to start playback.
PEAK SEARCH button
When the button is pressed, searching for the loudest
PEAK SEARCH
passage (peak) on a CD or in a program.
OPEN/CLOSE button
Pressing the
OPEN/CLOSE
disc on the tray ith the label side facing up. Gently press the front of the
disc tray to close.
SCROLL/(RECALL) button
Press this button to display the programmed track numbers and program
numbers (the order the tracks are programmed) in sequence.
If the loaded disc is a CD-TEXT disc, press this button while the text
information is displayed to scroll the characters.
CD-TEXT. button
When playing a CD-TEXT disc, press this button to switch the time
display to the text information display.
* If this button is pressed when the loaded disc is not a CD-TEXT
compatible disc, the display shows "No Text" then returns to the time
display.
6
button to find a particular passage in a
button opens the disc tray. Place a compact
button