Symptom
When using AirPlay
• Quit the application running in the background of the iPhone/iPod
with the iPhone/
touch/iPad, and then play using AirPlay.
iPod touch/iPad, the
• When playing via a wireless connection, outside conditions may
sound suffers from
affect the unit. To remedy this, change the network environment,
intermittent breaks
e.g. shorten the distance to the wireless LAN access point.
or AirPlay does not
• Update the iPhone/iPod touch/iPad application or iTunes to the
function.
latest version.
GM-XPortH
Symptom
Audio is not output
• Check that the Bluetooth device and Wireless receiver (RX101)
when a wireless
are correctly paired.
receiver (RX101 is
connected).
GRemote control unitH
Symptom
The set cannot be
• Batteries are worn out. Replace with new batteries.
operated with the
• Operate the remote control unit within a distance of about
remote control unit.
23 ft/7 m from this unit and at an angle of within 30°.
• Remove any obstacle between this unit and the remote control
unit.
• Insert the batteries in the proper direction, checking the q and
w marks.
• The set's remote control sensor is exposed to strong light (direct
sunlight, inverter type fluorescent bulb light, etc.). Move the set
to a place in which the remote control sensor will not be exposed
to strong light.
• The setting of the zone to operate does not match. Press
SELECT
to select the zone to operate.
DVD
Cause/Solution
Cause/Solution
24, 166, 168
Cause/Solution
ZONE
Resetting the microprocessor
Page
–
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
–
–
Page
X ON/STANDBY
Page
1
156
Turn off the power using
156
2
156
Press
X ON/STANDBY
156
3
Once the display starts flashing at intervals of about 1 second, release the two
buttons.
156
30,
102
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
173
GAME
A-DSX
X
.
while simultaneously pressing
GAME
and
A-DSX
.