Table of Contents
Advertisement
n Canceling the Panel lock function
1
Press
X ON/STANDBY
while you press and hold
in standby mode.
2
ui
z
Press
to select "FP LOCK
(z The currently set mode.)
3
ENTER
Press
to enter the setting.
The Panel lock function is canceled.
Even when the Panel lock function is set, you can operate the unit using the remote control unit.
DVD
Panel lock function
BACK
and
ENTER
with the unit
Off".
Remote lock function
• When not connecting an IR receiver, disable the Remote lock function. When the function is enabled, you
can not perform operations with the remote control unit.
• By default, this function is disabled.
X ON/STANDBY
n Disabling the sensor function of the remote control unit
1
When the main unit is in standby mode, press
BACK
ENTER
down
and
on the main unit.
2
ui
Press
to select "RC LOCK On".
3
ENTER
Press
to enter the setting.
The infrared light receiving function is disabled.
n Enabling the remote sensor function
1
When the main unit is in standby mode, press
down
BACK
and
ENTER
on the main unit.
2
Press
ui
to select "RC LOCK
(z The currently set mode.)
3
ENTER
Press
to enter the setting.
The infrared light receiving function on the main unit is enabled.
98
BACK ui
ENTER
X ON/STANDBY
while holding
X ON/STANDBY
while holding
z
Off".
Advertisement
Table of Contents
