Table of Contents
Advertisement
Setting items
Video Output
Auto (Dual) : The presence of a TV connected to the HDMI MONITOR
Make settings for HDMI
1 or HDMI MONITOR 2 connector is detected automatically, and that TV
monitor output.
connection is used.
Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
2 connector.
Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is always
used. Video is not output from the TV connected to the HDMI MONITOR
1 connector.
• If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and "Resolution" (vpage 118) is set to "Auto", the signals
are output with a resolution compatible with both TV.
• With "Resolution"
the TV you are using is compatible with the resolution under "Video" –
"Monitor" (vpage 137).
• This can also be set by pressing
HDMI OUT
Each time
NOTE
Depending on the monitor you have connected, the display may not
be correct when you set to "Auto (Dual)". In such a case, set to either
"Monitor 1" or "Monitor 2".
HDMI Control
On : Use HDMI control function.
You can link operations with
Off : Do not use HDMI control function.
devices connected to HDMI
and compatible with HDMI
• When a device that is not compatible with the HDMI control function is
Control.
connected, set "HDMI Control" to "Off".
• Please consult the operating instructions for each connected device to
check the settings.
• Refer to "HDMI control function"
about the HDMI control function.
NOTE
• When "HDMI Control" is set to "On", it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
• The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
• If the "HDMI Control" settings have been changed, always reset the
power to connected devices after the change.
DVD
Setting details
(vpage
118) not set to "Auto", check whether
HDMI OUT
on the main unit.
is pressed, the setting is changed as shown below.
Auto (Dual)
Monitor 1
Monitor 2
(vpage
92) for more information
Setting items
Standby Source
Last : Enters standby with the previously used input source.
Sets the HDMI input source
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER /
to put into standby when
CD : Enters standby with each of the input sources assigned to each input
the power is on.
connector.
"Standby Source" can be set when "HDMI Control" is set to "On".
Monitor 1 : Output from the HDMI MONITOR 1 connector.
Control Monitor
Set the HDMI MONITOR
Monitor 2 : Output from the HDMI MONITOR 2 connector.
terminal to output the HDMI
control signal.
• "Control Monitor" can be set when "HDMI Control" is set to "On".
• ARC function works only with the terminal selected by "Control
Monitor".
Power Off Control
All : If power to a connected TV is turned off independently of the input
Links the power standby of
source, power to this unit is automatically set to standby.
this unit to external devices.
Video : If power to a connected TV is turned off when the input source is
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / CD,
power to this unit is automatically set to standby.
Off : This unit does not link with power to a TV.
"Power Off Control" can be set when "HDMI Control" is set to "On".
117
Video
Setting details
Advertisement
Table of Contents
