Marantz SA-KI-PEARL-LITE User Manual page 30

ENGLISH
GUSB memory device/iPodH
Problem Cause
"OverCurrent" appears • The voltage able to be supplied
on the display. from this unit via the USB
memory device
exceeded.
"FAT Error" or "Cluster • An unsupported file system
Err" appear on the is being used. USB memory
display. device below 128 MB cannot
be supported.
"No File" appears on • No file able to be played on this
the display. unit exists.
"DRM Stream" • This is a file subject to digital
appears on the display. rights management.
The sound of the USB • The amplifier and speakers are
memory device being not connected properly.
connected is not heard.
• The amplifier power is not ON. • Turn the amplifier power ON.
• The amplifier's function or
selector switch is not set to
"CD" or "AUX" or such (to
whatever you have connected
this unit to).
• The amplifier's volume control
is set at the minimum level.
25 25
Corrective action
• The USB memory device
is not supported. Please
has been use a USB memory
device with an operating
current that is less than
1 A.
• Please use a USB memory
device formatted with a
compatible file system
(FAT32 or FAT16) and that has
at least 256 MB of memory.
• Check supported formats.
• Cannot play on this unit
because of unsupported
DRM.
• Connect the cables correctly.
(See the instruction manual
for the amplifier.)
(See the instruction manual
for the amplifier.)
• Switch the amplifier's
function or selector switch
to "CD" or "AUX" or such
(to whatever you have
connected this unit to).
(See the instruction manual
for the amplifier.)
• Adjust the amplifier volume.
(See the instruction manual
for the amplifier.)
Page
Problem
–
The sound of the iPod • The amplifier and speakers are
being connected is not not connected correctly.
heard.
• The amplifier power is not ON. • Turn ON the power to the
–
• The amplifier's function or
selector switch is not set to
"CD" or "AUX" or such (to
whatever you have connected
this unit to).
14, 17
15, 17 • The amplifier's volume control
is set at the minimum level.
–
Reading of USB • When
memory device takes capacity USB memory device,
time. it will take time to read
–
depending on its capacity.
Several
required
–
using a high-capacity device.
–
Cause Corrective action
• Connect the cables correctly.
(See the instruction manual
for the amplifier.)
amplifier. (See the instruction
manual for the amplifier.)
• Switch the amplifier's
function or selector switch
to "CD" or "AUX" or such
(to whatever you
connected this unit to).
(See the instruction manual
for the amplifier.)
• Adjust the amplifier volume.
(See the instruction manual
for the amplifier.)
connecting a high- • Wait until reading
completed.
minutes may be
for reading when
Page
–
–
–
have
–
is –