Installing Side Grip; Installing Or Removing Depressed Center Wheel - Makita 9503BH Instruction Manual

Installing side grip (auxiliary handle)
5
Screw
the side
grip on the tool securely.
The side
grip
can be installed
on
either side
of the tool, whichever
is
convenient.
Installing or removing depressed center wheel
CAUTION :
Always be sure that the tool
is
switched off and unplugged before installing or removing
the wheel.
Mount the inner flange onto the spindle.
Fit the wheel on over the inner flange and
screw the lock nut onto the spindle.
Depressed
center wheel
I
Inner flange
To
tighten the lock nut, press the shaft
lock firmly
so
that the spindle cannot re-
volve, then use the lock nut wrench and
securely tighten clockwise.
Lock
-
_ .
nut
-
wrench
-
To
remove the wheel, follow the installation procedure in reverse.
5