IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. CONSIDER WORK AREA ENVIRONMENT.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in. 16.
ADDITIONAL SAFETY RULES Keep guards in place. 2. Use only wheels having a maximum operating speed at least as high as “No Load RPM” marked on the tool‘s nameplate. When using depressed center wheels, be sure t o use only fiberglass-reinforced wheels. Check the wheel carefully for cracks or damage before operation.
Installing side grip (auxiliary handle) the side Screw grip on tool securely. The side can be installed either side grip of the tool, whichever convenient. Installing or removing depressed center wheel CAUTION : Always be sure that the tool switched off and unplugged before installing or removing the wheel.
Switch action Slide the slide switch forward to start, and the switch will lock in the "ON" position. Slide switch To stop, lgihtly depress the rear of the switch, and will return to the "OFF" position. CAUTION : Before plugging in the tool, always check to see that the switch actuates properly and returns to the "OFF"...
Take out the worn carbon Brush holder cap brushes, insert the new ones and secure To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
ACC ESSO R I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injuty t o persons.
5/8-48 Abrasive discs Lock nut (For abrasive disc) ( 1 0 disc per pkg) Part No. 22451 7- 1 Part No. Grit 742082- 3 742083- 1 742084- 742085- 7 742086-5 Grip Lock nut wrench Part No. 273485-5 Part No. 782413-4 Steel carrying case Part No.
Oci - 0 8 ' 8 7 115 mm (4-1/2") DISC GRINDER Model 9503BH Note: The switch and other part configurations may differ from country country.
‘ 8 7 MODEL 9503BH ‘YE ‘ k tM AtD $ i D DESCRIPTION DESCRIPTION MACHINE Head Screw M4xZO IWith Washer) Name Plate Spiral Bevel Gear 11 Brush Holder Cap Ball Bearing 6000LB Carbon Brush Switch Holder...
Warranty Policy Every Makita tool is thorou ly inspected and tested before leaving the factory. It is warranted to be free of defects from w o r f k k s h i p and materials for the period of ONE YEAR from the date of original purchase.