How
to use
1.
Switch action
To start the tool, simply pull the trigger.
Release
the trigger t o stop. For continuous
operation without having t o keep your
finger on the trigger, just pull the trigger
and then push in the lock button with your
thumb.
To
stop the tool from lock posi-
tion, just pull the trigger again and release
it.
2. Mounting belt
With the tool unplugged and the lever
pulled out all the way, slip the belt over
the rollers with the arrow direction on the
belt the same as that of tool revolution (or
belt life i s shortened).
3.
Belt adjustment
Flip sander over on i t s back and use the
adjustment knob to obtain equal tension of
belt over the front and back rollers. Then
plug in sander and switch it on, using the
adjustment knob to center the belt as it
runs over the rollers. Failure t o adjust belt
properly over rollers can result in frayed
belt edges.
5