Shindaiwa C282 Owner's/Operator's Manual page 19

Maintenance (continued)
135 hour maintenance
Muffler maintenance
Engine Cover
Screws
If the engine becomes sluggish and low
on power, check and clean the spark
arrester screen.
1. Remove the spark plug boot.
2. With a 4mm hex wrench remove
the 1 muffler cover and 3 engine
cover screws and the engine cover.
The muffler cover is attached to the
engine cover at the top and front
by tabs. To remove push inward at
arrow area while pulling outward.
See insert image.
3. With a Phillips type screwdriver,
remove the 5 screws holding the
spark arrester screen and cover to
the muffler.
Muffler
Cover
Screw
4. Remove the screen and clean it with
a stiff bristle brush.
5. Remove the 3 muffler bolts and the
muffler.
6. Inspect the cylinder exhaust port for
any carbon buildup.
7. Gently tap the muffler on a wood
surface to dislodge any loose carbon.
8. Reassemble the spark arrester, muf-
fler and engine cover in the reverse
order of disassembly.
Engine Cover
Muffler
Gasket
Spark Arrester
Spark Arrester
Screen
Muffler Gasket
WARNING!
Never operate the unit with a
damaged or missing muffler or spark
arrester! Operating with a missing
or damaged spark arrester is a fire
hazard and could also damage your
hearing.
If you note excessive carbon buildup, con-
sult with an authorized Shindaiwa servicing
dealer.
Muffler Cover
Muffler
Screws
Screws
Outlet
Cover
IMPORTANT!
19