Table of Contents
Advertisement
IMPORTANT: The DMAN PCI requires the installation of DirectX drivers,
version 5 or higher. Without DirectX installed, the DMAN PCI driver instal-
lation may crash. The DMAN PCI Setup program can install DirectX 6 on
your computer before the DMAN PCI drivers are installed. It is very impor-
tant to select this option if you do not already have DirectX 5 or higher
installed on your computer.
Also in the Select Components dialog box is the Destination Folder setting.
This specifies where the selected software components will be stored. By
default, this folder is C:\MIDIMAN\DMAN PCI. It is recommended that you
leave that setting as is.
NOTE: You may select another target folder by selecting the Browse... but-
ton. If you do choose this option, be sure to write down the destination fold-
er, as you will need this information later in the installation process.
6. Select "Next>" to copy the driver files to the destination folder. This copy
process may require a few minutes. Since the software requires several
diskettes, Setup will occasionally prompt you for the next diskette. When
prompted, remove the previous diskette, insert the new one, and select
"OK" (no need to browse or type a path other than [drive letter]:\ ).
Continue to do this until all the components have been copied to your hard
disk.
7. If you have selected the DirectX component for installation as suggested,
setup will now run the DirectX installer. When the Microsoft DirectX 6
Setup dialog box appears, select "Yes" to begin installation.
NOTE: The DirectX 6 installer is smart enough to not overwrite newer ver-
sion(s) of DirectX that may already be installed on your system.
8.
The Microsoft DirectX 6 Setup will display a Licensing Agreement. To
agree, press "Yes." Setup will continue its check for versions of DirectX,
then extract and copy the necessary files.
9.
A DirectX Setup dialog box appears when it completes the installation suc-
cessfully, and it will ask you to select "OK." Click on "OK".
10. Next, the Information dialog box tells you that Setup will now install the
drivers and update registry. It may take up to a few minutes. Click "OK,"
and wait for the Setup Complete dialog box to appear.
11. When the Setup Complete dialog box appears, setup is complete. It is rec-
ommended that you shut down your computer and then install the DMAN
PCI card. To do this, select "No, I will restart my computer later," then
click "Finish". This will return you to the Windows Desktop. You can
remove the last floppy disk at this point. Go to the Start button, choose
"Shut Down," then tell the computer you want it to "Shut down," and
click OK.
8
Advertisement
Table of Contents
