Windows Driver Configuration; The Soundfusion Control Panel Applet - M-Audio Dman PCI Manual

Pci digital audio card

Hide thumbs Also See for Dman PCI:

Table of Contents

4. Click OK. This will install the DMAN-PCI drivers to their proper locations

within the system.

5. A System Settings Change box now shows up, asking if you want to

restart your computer to finish setting up the new hardware. Click "Yes."

6. Reboot your system if asked. Your DMAN-PCI is now ready for use.

Windows Driver Configuration

In most cases, the DMAN PCI will install without a hitch. However, it is some-

times possible for PnP to run out of resources and a resource conflict will

result. This section focuses on driver configuration and also the elimination of

resource conflicts.

The DMAN PCI software installation places the SoundFusion properties page

in the Windows Control Panel. This properties page is used for specialized

configuration of the Crystal SoundFusion DSP onboard the DMAN PCI. You

may open the SoundFusion properties page by selecting Settings | Control

Panel | SoundFusion from the Windows Start menu.

There are three tabs in the properties page: General Properties, AEC, and

MIDI. General Properties controls the following settings:

•

3D Stereo Enhancement. Enabling this feature will increase the apparent

left/right channel separation of the outgoing audio. This "enhancement"

adds a large amount of coloration to the audio and may or may not be

what you desire for your use. This is disabled by default to avoid any

potential confusion.

Table of Contents