Delta Tdif Recording Tutorials - M-Audio Delta TDIF Manual

the current configuration. Once you have done this, click 'OK', and your
current configuration has been saved to disk. If you decide that you no
longer need a particular configuration, click the 'Delete' button.
Highlight the name of the configuration file that you wish to delete, and
click the 'OK' button. To recall or reload a saved configuration, click the
'Load' button. Highlight the name of the configuration file that you wish
to recall, and click 'OK'. Those settings will now appear in the Delta
Control Panel and the driver will automatically update the hardware.
H/W INSTALLED: Up to four Delta cards may be installed in a system
at one time. This section displays all installed Delta cards, and allows you
to select which particular card is under the control of the control panel
software. To select a card for configuration, click the radio button to the
left of that particular card in the "H/W Installed" list.
ON THE MAC: To save your Delta control Panel settings, go to the File
menu and select "Save,"or "Save as." A dialog box will appear, promting
you to name the current configuration. Once you have done so, click the
Save button. To save the current settings as your default, go to the File
menu and choose "Save as Preferences."
In the upper righthand corner of the control panel is a "H/W Installed"
drop-down list. At the time of this writing, the Delta Mac ASIO drivers
will support only a single Delta device, and of course the Sound Manager
will support only one stereo pair regardless of how many audio cards are
installed in your system. The H/W Installed list will display "Delta TDIF
as the active device in the control panel "

Delta TDIF Recording Tutorials

In this section we will explore a few sample setups for recording and
playback using the Delta TDIF PCI Audio Card. This is by no means an
exhaustive tutorial but its intent is to help you understand most of the
Delta TDIF's feature set. Before beginning, you should open your music
software and profile the Delta TDIF, enable its drivers, or otherwise setup
the software for operation with the Delta TDIF.
NOTE: All of these examples refer to the Windows MME driver names.
If you're using ASIO drivers, you'll need to substitute the appropriate
driver names when referring to software inputs or outputs.
30