Advertisement
Advertisement
Table of Contents
Related Manuals for La Crosse Technology TX6U
Summary of Contents for La Crosse Technology TX6U
- Page 1 TX6U Wireless 433 MHz Temperature Sensor/Transmitter Instruction Manual...
-
Page 2: Battery Installation
QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor station and outdoor remote 3 to 5 feet apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the outdoor remote first then into the indoor station. (All outdoor remotes must be started before the indoor station) 4. - Page 3 MOUNTING THE REMOTE TEMPERATURE SENSOR/TRANSMITTER The remote temperature sensor/transmitter can be mounted in two ways: • with the use of screws, or • using the adhesive tape. A. MOUNTING WITH SCREWS 1) Remove the mounting bracket from the remote temperature sensor/transmitter. 2) Place the mounting bracket over the desired location.
- Page 4 La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.
- Page 5 All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher. This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue.
Need help?
Do you have a question about the TX6U and is the answer not in the manual?
Questions and answers