Advertisement
Quick Links
Power & Mounting
1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash
when transmitting.
Mounting:
1. Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw
through the front of your sensor.
2. Mount your sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is
preferred to avoid inaccurate readings from the sun.
3. The maximum wireless transmission range to the weather station is up to 400 feet (121 meters) in open
air, not including walls or floors.
4. Be sure your sensor is mounted vertically, to allow moisture to drain out properly.
Note: Watch sensor mounting video:
Thermo-hygro Sensor
TX
∙ Press TX to send a signal
∙ Press F/C to select Fahrenheit
or Celsius display on sensor.
Model: LTV-TH2
DC: 083017
http://bit.ly/TH_SensorMounting
F/C
Hole for
mounting
LED Light
Battery Cover
Advertisement
Related Manuals for La Crosse Technology LTV-TH2
Summary of Contents for La Crosse Technology LTV-TH2
- Page 1 ∙ Press TX to send a signal ∙ Press F/C to select Fahrenheit or Celsius display on sensor. Battery Cover Model: LTV-TH2 DC: 083017 Power & Mounting 1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash when transmitting.
- Page 2 If you have ideas for features or support solutions you’d like to see us make, please let us know! We tru- ly want to make owning a La Crosse Technology product not only a practical experience, but also a fun one.
- Page 3 • Dimensions: 1.97” L x 0.75” W x 5.73” H (5.0cm L x 1.91cm W x 14.55cm H) Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support...