Advertisement
Power & Mounting
1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash
when transmitting.
Mounting:
1. Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw
through the front of your sensor.
2. Mount your sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is
preferred to avoid inaccurate readings from the sun.
3. The maximum wireless transmission range to the weather station is up to 400 feet (121 meters) in open
air, not including walls or floors.
4. Be sure your sensor is mounted vertically, to allow moisture to drain out properly.
Note: Watch sensor mounting video:
Thermo-hygro Sensor
TX
∙ Press TX to send a signal
∙ Press F/C to select Fahrenheit
or Celsius display on sensor.
Model: LTV-TH3
DC: 083017
http://bit.ly/TH_SensorMounting
F/C
Hole for
mounting
LED Light
Battery Cover
Advertisement
Table of Contents
Related Manuals for La Crosse Technology LTV-TH3
Summary of Contents for La Crosse Technology LTV-TH3
- Page 1 ∙ Press TX to send a signal ∙ Press F/C to select Fahrenheit or Celsius display on sensor. Battery Cover Model: LTV-TH3 DC: 083017 Power & Mounting 1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash when transmitting.
- Page 2 If you have ideas for features or support solutions you’d like to see us make, please let us know! We tru- ly want to make owning a La Crosse Technology product not only a practical experience, but also a fun one.
- Page 3 • Dimensions: 1.97” L x 0.75” W x 5.73” H (5.0cm L x 1.91cm W x 14.55cm H) Warranty and Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support...
Need help?
Do you have a question about the LTV-TH3 and is the answer not in the manual?
Questions and answers
I replaced the batteries in LTV-TH3,but blue light doesn't come on. Is the device no longer functioning?
If the blue LED light does not flash after replacing the batteries, the La Crosse Technology LTV-TH3 device may not be functioning or the batteries may not be installed correctly. The blue light is supposed to flash when the sensor is transmitting. Recheck battery polarity and ensure they are fresh and properly installed. If the issue continues, the device may be malfunctioning.
This answer is automatically generated