QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor station and outdoor remote 3 to 5 feet apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the outdoor remote first then into the indoor station. (All outdoor remotes must be started before the indoor station) 4.
Page 3
3) Remove the protective strip from the other side of the tape. Position the remote temperature sensor/transmitter in the desired location, ensuring that the weather station can receive the signal. SPECIFICATIONS...
Page 4
This warranty does not cover any defects resulting from improper use, unauthorized repairs, faulty batteries, or the temperature sensor/transmitter’s inability to transmit a signal due to any source of interference.
Need help?
Do you have a question about the TX6 and is the answer not in the manual?
Questions and answers