Figure 6. Mounting Dimensions - Seagate Medalist Pro Series Product Manual

Medalist Pro 6450/5040 Product Manual, February 1997
[3]
G
C
D
[1]
F
A
B
J
[2]
H
K
L

Figure 6. Mounting dimensions

K
Notes.
E
[1]
Mounting holes three on each side, 6-32 UNC.
Max screw length into side of drive 0.15 in. (3.81
mm). Screw tightening torque 6.0 in-lb (0.675
NM) max with minimum thread engagement of
0.12 in. (3.05 mm).
Mounting holes four on bottom, 6-32 UNC. Max
[2]
screw length into bottom of drive 0.15 in. (3.81
mm). Screw tightening torque 6.0 in-lb (0.675 NM)
max with minimum thread engagement of 0.12 in.
(3.05 mm).
Power and interface connectors can extend past
[3]
the "A" dimension by 0.040 in. (1.02 mm).
[4] Centerline of pad for Pin 1 of power connector.
[5]
Dimensions to Pin 1 of each connector are
nominal values.
[4] M
Dimension Table
Inches
A 5.74 ± 0.010
B 4.00 ± 0.010
C 1.00 + 0.021
– 0.009
D 2.362 ± 0.010
E 0.620 ± 0.020
F 4.000 ± 0.010
G 0.250 + 0.010
– 0.005
H 1.750 ± 0.010
J 3.750 ± 0.010
K 1.00 ± 0.010
L 4.000 ± 0.010
M 0.143
[5]
23
Millimeters
145.80 ± 0.25
101.60 ± 0.25
25.40 + 0.53
– 0.22
60.00 ± 0.25
15.75 ± 0.50
101.60 ± 0.25
6.35 + 0.25
– 0.12
44.45 ± 0.25
95.25 ± 0.25
25.4 ± 0.25
101.6 ± 0.25
3.63
[5]