Getting Started/Assembly; Handlebars; Front/Rear Grill/Guard; Battery - X-TREME XA-150 Product Manual

GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your XA-150
Assembly
1. Carefully remove the XA-150 from the box.
2. Your XA-150 comes with the handlebars
folded for shipping.
handlebars to the desired up-right position
and secure in place using the enclosed
bolts as shown.
3. Your XA-150 also comes with the front
bumper/grill detached for shipping. Begin
by locating the 4 bolts. Next, attach the
left and right bracket to the ATV frame as
shown and secure with the 4 supplied bolt.
as shown.
4. Install the rear guard using the 4 supplied
bolts as shown.
5. Your battery comes dry and must have the
acid added. USE EXTREME CAUTION
WHEN HANDLING
WEAR PROTECTIVE
GOGGLES AND COVER ALL EXPOSED
SKIN. Attach plastic tube to the bottle of
acid, then fill each cell as shown
6. Insert battery into the battery housing area
and attach battery cables as shown below.
Page10
Simply rotate the

BATTERY

ACID.
GLOVES AND