X-TREME XA-150 Product Manual page 19

Starting using the Kick Start
1. Follow steps 1-2 above under Starting using the Electric Start.
2. With the kick start pedal out, kick down on the kick start in a rapid and
continuous way until the engine starts
3. Once started turn the kick start pedal inward.
NOTE: Take care to not allow the kick starter to strike against the engine casing.
4. Continue with steps 5-6 above.
Once the ATV is properly started and has warmed up, release the parking brake and with
both hands on the handlebars, depress the throttle slowly to being forward movement.
To slow down, release the throttle and depress both the left and right hand brakes to come
to a full stop.
Practice braking to ensure proper pressure to come to a full and safe stop. Never
depress both brakes strongly as it may lock up the wheels and reduce control of the ATV.
To PARK the ATV, release the throttle completely. Come to a complete stop and turn the
ignition to the off position. Pull the hand brake towards the rider and press the button
down to engage the parking brake.
Page19