Scag Power Equipment STC Operator's Manual page 26

Tracking Adjustment
CAUTION:
Stop the engine and remove the key from the
ignition before making any adjustments. Wait for
all moving parts to come to a complete stop
before beginning work.
CAUTION:
The engine and drive unit can get hot during
operation causing burn injuries. Allow engine
and drive components to cool before making any
adjustments.
-NOTE-
-NOTE-
6.3 THROTTLE CONTROL AND CHOKE
ADJUSTMENTS
6.4 BELT ADJUSTMENT
WARNING:
Before removing any guards, shut the
engine off and remove the ignition key.
6.5 BELT ALIGNMENT
22
Section 6
-NOTE-