Chapter 1 Internet Radio Mode; Turning On; Setup Wizard - Kogan KADABXXSTDB User Manual

1.1 Turning on

1. The proper voltage for this radio is AC 100V~240V/50-60Hz. Please
check the voltage in your area before plugging in the unit.
2. Press POWER to switch on, for initial use, it will take you to 'Setup
wizard'.

1.2 Setup Wizard

1. Continue the above step, press SELECT to confirm 'YES'turn SELECT to your preferred 'hour format',
press SELECT to confirm.
2. Press SELECT to confirm 'Update from Network'. Now, following your radio's instruction, configure the
following parameters:
 Timezone: select your local timezone.
 Daylight savings: On or Off
 Wlan region: Most of Europe/USA/Canada/Spain etc.
 SSID: Sometimes radio may find more than one network, turn SELECT to your selecting one, then press SELECT.

Note: If a password (WEP/WPA) isn't required by your network, radio will connect to the network automatically.
3. If a WEP/WPA key (password) is required, radio will ask you to input
the WEP/WPA code and display the password entry screen as:
Turn

SELECT
press
SELECT

Note: WEP/WPA pass codes are case-sensitive.
If a wrong operation is being conducted, select '

this wrong character.

Note: a.>
b.> the method of select
select
c.>
d.> Radio will automatically save the WEP/WPA you've input, so no bother to re-enter these codes.

Chapter 1 Internet Radio Mode

to cycle through the alphanumeric character list,
to select an appointed character.
= Backspace.
,
, then continue anti-clockwise turn SELECT to select
means back to previous track.
' to delete
: while cursor point to '
or
9
', anti-clockwise turn SELECT to
or in turn.