Manual Tune; Drc (Dynamic Range Control) Value; To Change Station Order - Kogan KADABXXSTDB User Manual

3.6 Manual Tune

1. Press MENUturn SELECT to < Manual tune >, press SELECT to confirm.
2. Turn SELECT to step between the channels and press SELECT to select the current channel.
3. Press SELECT again to exit this order.

3.7 DRC (Dynamic Range Control) Value

You can set the level of the compression of stations to eliminate the differences in dynamic range or sound level
between radio stations.

a. Setting DRC to off indicates no compression.
Note:
b. Setting DRC to low indicates little compression.
c. Setting DRC to high shows maximum compression.
1. Press MENU turn SELECT to < DRC >, press SELECT to confirm.
2. Turn SELECT to your preferred option, then press SELECT to confirm.

3.8 To change station order

1. The path is: press MENU < Station order >, press SELECT to confirm.

Note: There are 3 options: Alphanumeric, Ensemble and Valid. ' #' shows before the default of your setting option to indicate
current station order.
STATION ORDER
Alphanumeric
Ensemble
Valid
2. Turn SELECT to your preferred option, press SELECT to confirm.

Note: If there is a multiplex corresponding to this channel
and frequency, then the display will show a tuning meter
with the signal strength and the multiplex name after a few
seconds.
DESCRIPTION
Display all stations in alphanumeric order.
List the current broadcasting stations before inactive stations.
Remove inactive stations from the station list.
18