3.1 Getting Started
Press Mode repeatedly until < DAB radio > is showing up. On initial use it will perform
1.
stations list in memory,
Note: or press MENU to enter < Main menu >, and then turn SELECT to < DAB >, press SELECT to confirm
2. Once the scanning is completed, the DAB+ stations will be displayed in alphanumeric order. The first station in the
list will be selected.
Note: if no DAB+ signal is found in your area, it may be necessary to relocate your radio to a stronger signal area.
3.2 Shift to another DAB Station
1. While a DAB+ program is playing, you can move back to the previous screen at any time by pressing
BACK on remote control), or pressing MENU to go to 'station list'
2. While highlighting 'Station list', press SELECT to confirm.
3. Turn SELECT to cycle through stations list, and then press SELECT to confirm.
3.3 Update Station List
It's a good idea to carry out a 'scan' from time to time to keep your DAB+ station list up-to-date. You can press
MENU turn SELECT to < Scan >, press SELECT to confirm.
3.4 Dynamic Label Segment (DLS)
1. This is scrolling text information supplied by the DAB+ station. It may comprise information on music title or
detail of the program which is provided by the broadcaster.
2. To view further information, press INFO repeatedly while a DAB+ program is playing, screen will appear displaying
information such as Artist, Album, Playback buffer indicating bar and Today's Date etc.
3.5 Prune Invalid
1. Press MENUturn SELECT to < Prune invalid >, press SELECT to confirm.
2. Turn SELECT to 'YES', and press SELECT to confirm.
Chapter 3 DAB Mode
17
a full scan and store
.
(or