Table of Contents
Advertisement
7.5 Equaliser
Note: Several preset EQ modes are available; also a user-defined setting through 'My EQ profile setup'.
1. It can be activated by pressing MENU < Main menu > < System settings > < Equaliser >, press SELECT
to confirm.
2. Turn SELECT to your preferred one, take set 'My EQ profile setup' as example:
a.
Press SELECT to confirm 'My EQ profile setup'.
b.
Press SELECT to confirm Bass, turn SELECT to adjust, and then press SELECT to confirm.
c.
Set Treble accordingly.
d. Finally turn SELECT to 'Loudness', press SELECT to switch it between off and on.
7.6 Language
1. This can be changed by pressing MENU < Main menu > < System settings > < Language>, press
SELECT to confirm.
2. Turn SELECT to your preferred language, and then press SELECT to confirm.
7.7 Factory Reset
A factory reset resets all user settings to default values, so time/date, network configuration and presets are lost.
However, the radio's current software version is maintained, as is registration with the Internet radio portal.
Internet radio favourites are kept unless you re-register your radio with another account on the portal website.
1.
It can be achieved by pressing MENU < Main menu > < System settings > < Factory Reset >
Proceed? YES or NO.
2.
Press SELECT to confirm 'YES'.
7.8 Enter Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings for date/time
and network.
Once complete, the system is ready to use.
1. To run the setup wizard again, press MENU Main menu System settings
2. Press SELECT to confirm, then step by step to set it.
7.9 SW Version and Radio ID (or System Info)
This information may be requested when dealing with technical support issues, system info includes SW version,
radio ID and Friendly name (radio name).
It can be activated from < Main menu > < System settings > < Info >, press SELECT to confirm.
24
Setup wizard
Yes.
Advertisement
Table of Contents
