Table of Contents
Advertisement
Docking and Playing Your iPod/iPhone
The dock can play music files stored on your iPod/iPhone through your radio speaker.
The methods of playing iPod or iPhone are both alike. We will show how to play iPod as example.
Docking your iPod
1. Insert the Dock Adapter (if available) that fits your iPod model, and then plug in your iPod. The adapter number is
marked at the back or side of each dock adapter.
2. Insert your iPod into the iPod dock on the top of the unit. Dock will begin to charge if necessary. Charging will stop
when it is fully charged (check the iPod screen).
3. In use, we can shift to iPod mode by pressing Mode repeatedly until iPod shows up.
4. To play music...
5. Adjust the volume by turning the POWER knob.
1. Press SOURCE repeatedly until < AUX in > is showing up.
4. To gain optimal volume levels, adjusting the output volume level on both the source device and the radio itself
are recommended.
Note: AUX IN allows quick and easy connection the MP3 player or other external sound sources.
Chapter 5 iPod/iPhone Mode
a. Press
pause, press again to continue play.
While using remote control to conduct your radio, press
to stop, Press
b. Or, select and play a track by using your iPod.
Chapter 6 AUX IN Mode
or
to previous or next track, press
(on the right side of
Note: Or, enter 'MAIN MENU', and then turn SELECT to < AUX in >,
then press SELECT to confirm.
2. Via a 3.5mm cable connection, your radio can be
transformed into a high quality digital audio speaker system.
3. Connect one end of the audio cable to the headphone (or
auxiliary out) socket of your source device, the other end
connect to AUX IN socket on the rear of your radio.
The radio will show the display at left.
21
to
) to restart play.
Advertisement
Table of Contents
