Advertisement
How to take off SS jar correctly:
Press Start/Stop button to stop the machine, then turn the switch on top anti-clockwise and then press
the cover release button (Figure 9) until the latch unlocks. The jar cover shouldn't be left standing upright
(Figure10), instead you need to take it off after you're finished (Figure 11). Finally, hold the handle of SS
jar and turn the jar slowly clockwise from the (Figure 4) position to the (Figure 3) position. The SS jar can
then be taken off from housing.
Button
Figure 11
Figure 9
Figure 10
LCD display:
Plug unit in and switch on the electrical button in housing. If the SS jar is not placed correctly or the top
switch is not switched correctly, the LCD will display as (Figure 12). When SS jar is placed correctly and
top switch is switched correctly, the LCD would display as (Figure 13).
Time, temperature and speed can be adjusted under this condition.
Note: For safety considerations, when cover is closed correctly, the top switch can not be
switched to the right place. Please do not switch it by force.
Blade assembly
Nut
Figure 12
Figure 13
Figure 14
Advertisement
