Advertisement
4. Tips before using:
How to place the SS jar correctly and set up the program:
Before the first using, clean the SS jar thoroughly. Put the jar into the housing in right direction (Figure 3),
hold the handle of SS jar and turn the SS jar anti-clockwise slowly to the correct position. (Figure 4).
Figure 3
After putting in ingredients, push the cover shaft into the handle groove (Figure 5), then cover the SS jar.
Press the cover down firmly (Figure 6) to ensure the cover fasten is locked on housing, then turn the
switch clockwise (Figure 7).
Figure 5
Switch
Figure 7
Then, plug the power cord; switch on the electrical button on the back bottom of the housing (Figure 8).
Set time, temperature and speed on control panel, then press Start/Stop to start the machine.
Arrow matches
unlock
Match the place.
Arrow matches
lock
Figure 4
Press here.
Figure 6
Figure 8
Advertisement
