Tuner Log Function Time Setting - Kenwood DPX404U Instruction Manual

Function of DPX504U
Log Function
Tuner Log Function time setting
You can set the timing to log the station by the
reception time.
1
Enter Function setting mode
Press the [VOL] knob.
2
Select the Tuner Log time set mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings" > "Log"
3
Set the reception time for the timing to start
logging the station
Turn the [VOL] knob to select time ("10SEC",
"30SEC", "1MIN", "2MIN", or "5MIN"), and then
press the [VOL] knob.
4
Exit Function setting mode
Press the [ ] button for at least 1 second.
60
|
DPX504U/ DPX404U/ DPX304
> "Tuner Log Time Set"