Play Function; Usb Setting - Kenwood DPX404U Instruction Manual

Play function
Scan play
Press the [2] button.
Successively plays the intro of the music in the
folder.
When Scan Play is turned on, "File Scan ON"/ "FILE
SCAN" is displayed.
Pressing this button again plays songs in the
normal mode starting with the song being played
now.
Random play
Press the [3] button.
Randomly plays the music in the folder.
When Random Play is turned on, "Folder Random
ON"/ "FOLDER RANDOM" is displayed.
Press this button again cancels the Random play.
Repeat play
Press the [4] button.
Switches between File Repeat ("File Repeat ON"/
"FILE REPEAT"), Folder Repeat ("Folder Repeat ON"/
"FOLDER REPEAT"), and OFF ("Folder Repeat OFF"/
"REPEAT OFF") when pressed.
⁄
•
The Music Editor media does not allow you select folder
repeat play.
USB Setting
You can select the following USB Setting items.
1
Select USB source
Press the [SRC] button.
Select the "USB" display.
2
Enter Function setting mode
Press the [VOL] knob.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings"/ "SETTINGS".
4
Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
"Settings"/
"SETTINGS"
"Skip Search"/ Sets the ratio of skip performed with
"SKIP SEARCH" Search (Function of Music Editor media)>
(page
"0.5%"/ "1%"/ "5%"/ "10%"
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
•
The setting of "Skip Search" in
and that in <USB Setting> (page 17)
Changing the setting of one reflects the other.
<Skip
16).
( : Factory setting)
<iPod Setting> (page 12)
are always the same.
English
17
|