Usb And Sd Setting; Skip Search; Direct Music Search - Kenwood KDC-BT92SD Instruction Manual

USB device/ SD card Operation

USB and SD Setting

You can select following USB and SD Setting items.
1
Select USB or SD source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Settings".
4
Select the setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
"Settings"

"Skip Search"

Sets the ratio of skip performed with <Skip
Search> (page 13).
"0.5%"/ "1%"/ "5%"/ "10%"
( : Factory setting)
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Menu List mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• The setting of "Skip Search" in <iPod Setting> (page
10) and that in <USB and SD Setting> (page 17) are
always the same. Changing the setting of one reflects
the other.
• This operation is effective only for the files registered in
the database created with KENWOOD Music Editor.
17
|
KDC-BT92SD
Skip Search
You can scroll up or down according to the number
of the selected Search items so that you can quickly
switch the display position.
1
Select USB or SD source
2
Enter File Search mode
Press the [MENU] button.
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Music" item.
3
Enter Skip Search mode
Press the [PRESET] button for at least 1 second.
4
Search for music
Operation type Operation
Move between items Turn the [VOL] knob.
Select an item Press the [VOL] knob.
Skip Search Press the [DISP] or [iPod] button.
Keep pressing the button for 1 second or
longer skips songs at 10% irrespective of
the setting.
Sets the ratio of skip Press the [4] or [¢] button.
performed
Return to previous item Press the [MENU] button.
After this step, see step 4 of <File Search> (page 16)
to select a song.
Cancelling the Skip Search
Press the [PRESET] button for at least 1 second.
⁄
• This operation is effective only for the files registered in
the database created with KENWOOD Music Editor.
• Set the ratio with "Skip Search" in <USB and SD Setting>
(page 17).
Function of remote control

Direct Music Search

Searching the music by entering the file number.
1
Enter Direct Music Search mode
Press the [DIRECT] button on the remote
control.
2
Enter the music number
Press the number buttons on the remote
control.
3
Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [DIRECT] button.
⁄
• Direct Music Search cannot be performed during playing
of "Music Editor" media, Random play, or scan play.
18
|
English