Listening To A Disc/ Usb/ Sd/ Ipod; Start Playing A Disc; Start Playing A Usb Device Or Ipod - Kenwood KDC-4754SD Instruction Manual

Listening to a disc/ USB/ SD/ iPod

Detaches the faceplate
Press to select track/file.
Hold to fast-forwards/reverses.

Start playing a disc

1 Press SRC to turn on the power.
2 Insert a disc into the loading slot.
Playback starts automatically.
About Audio file
Playable Audio file: AAC-LC (.m4a), MP3 (.mp3),
WMA (.wma)
Playable disc media: CD-R/RW/ROM
Playable disc file format: ISO 9660 Level 1/2, Joliet,
Romeo, Long file name.
Playable USB device file system: FAT16, FAT32
Although the audio files are complied with the standards
listed above, the playback maybe impossible depending
on the types or conditions of media or device.
About USB device
This unit can play AAC/MP3/WMA files stored on a USB
mass storage class device.
Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
You cannot connect a USB device via a USB hub and
Multi Card Reader.
Make sure all important data has been backed up to
avoid losing the data.
Connecting a cable whose total length is longer than
5 m can result in abnormal playback.
10
Loading slot
Press to select previous/next folder.
• Not available if "ALL RANDOM" is selected.
Ejects the disc. ("NO DISC" appears
and "IN" indicator goes off.)
Press to pause, press again
to resume playback.

Start playing a USB device or iPod

1 Press SRC to turn on the power.
2 Connect a USB device or an iPod to the
USB terminal.
The source automatically switches, and
playback starts.
USB device (commercially available)
(commercially available)
KCA-iP102
(optional accessory)
USB terminal
CA-U1EX (Max.: 500 mA)
(optional accessory)
Apple iPod