Bluetooth Audio Operation; Basic Operation; Play Mode - Kenwood KDC-BT92SD Instruction Manual

Bluetooth Audio Operation

SRC MENU VOL
4 38 ¢

Basic Operation

Selecting Bluetooth Audio source
Press the [SRC] button.
Select the "BT AUDIO" display.
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
Pause and play
Press the [38] button.
Music Search
Press the [4] or [¢] button.
Fast Forward or Fast Backward of the Song
Hold down the [4] or [¢] button.
Active device Switching
Press the [38] button for at least 1 second.
⁄
• All or some of the operations above cannot be
performed if the Bluetooth audio player is not ready for
remote control.
• Switching to the Bluetooth audio source does not start
or stop playback automatically. Perform the operation for
starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
• Two audio devices can be connected simultaneously.
• Speakers from which audio is output change depending
on the Bluetooth setting "Bluetooth HF/Audio". The
default is Front. Refer to <Bluetooth Setting> (page
53)
27
|
KDC-BT92SD

Play mode

You can select a Play Mode, such as Random play
and Repeat play.
1
Select Bluetooth audio source
2
Enter Menu List mode
Press the [MENU] button.
3
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Play Mode".
4
Select the Play Mode
Turn the [VOL] knob.
Display Overview
"File Repeat" When set to "ON", plays the music repeatedly.
"ON" / "OFF"
"Random" When set to "ON", plays the music in the
folder randomly.
"ON" / "OFF"
( : Factory setting)
5
Make a setting
Press the [VOL] knob.
6
Exit Play Mode
Press the [MENU] button.
28
|
English