Warnings - Jet EQUIPMENT & TOOLS “W” Series Operator's Manual

Read and understand the entire operator's manual before using the pallet truck.
Do not place hands or feet under the pallet truck at any time.
Do not operate a loaded pallet truck on ramps or inclines.
Do not tip load pallet truck forks. This may cause damage to the forks and personal
injury if the rear of the pallet truck suddenly "pops up".
Never leave a loaded pallet truck unattended in the raised position. Always lower
load to the floor.
Do not load pallet truck beyond its rated capacity.
Secure load before transporting.
To prevent accidental tipping, make sure load is centered on the forks.
Do not move a loaded pallet truck by other than manual force.
Failure to comply with these warnings may result in personal injury and/or property
damage.
The specifications in this manual are given as general information and are not binding. JET Equipment
& Tools reserves the right to effect, at any time and without prior notice, changes or alterations to parts,
fittings, and accessory equipment deemed necessary for any reason whatsoever.

WARNING
3