Table of Contents
Advertisement
300M Wireless N Router
RNX-N300RT
views all of the valid route entries in use. The Destination IP address, Subnet Mask,
Gateway, and Interface will be displayed for each entry.
Destination Network - The Destination Network is the address of the network or host
to which the static route is assigned.
Subnet Mask - The Subnet Mask determines which portion of an IP address is the
network portion, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact
between the Router and the network or host.
Interface - This interface tells you either the Destination IP Address is on the LAN &
WLAN (internal wired and wireless networks), or on the WAN (Internet).
4.12 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 4-58.
Click any of them, and you will be able to configure the corresponding function. The
detailed explanations for each submenu are provided below.
4.12.1 Control Settings
Choose menu "Bandwidth Control → Control Settings", you can configure the Egress
Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should
be less than 1000000Kbps.
Figure 4-57 System Routing Table
Figure 4-58 The Bandwidth Control
-92-
User Manual
Advertisement
Table of Contents
