Wireless Router
RNX-N150RT User Manual
Destination Network - The Destination Network is the address of the network or host to
which the static route is assigned.
Subnet Mask - The Sub
portion
, and which portion is the host portion.
Gateway - This is the IP address of the gateway device that allows for contact between the
router and the network or host.
Interface - This
interface tells you either the Destination IP Address is on the LAN & WLAN
(internal wired and wireless networks), or on the WAN (Internet).
4.15 Bandwidth Control
Figure 4-71
There are two submenus under the Bandwidth Control menu as shown in Figure 4-71. Click any of
them, and you will be able to configure the corresponding function. The detailed explanations for
each submenu are provided belo
4.15.1 Control Settings
Choose menu "Bandwidth Control→
and Ingress Bandwidth in the next screen. Thei
1000000Kbps.
Figure 4-70 System Routing Table
net Mask determines which portion of a
w.
Control Settings
- 95 -
n IP address is the network
", you can configure the Egress Bandwidth
r values you configure should be less than