Roland V-Accordion FR-1x Owner's Manual page 39

The display now shows a flashing "Uxx" message (the
"xx" refers to the User Program you have been editing
thus far).
U1A
Flashes
5.
Do one of the following:
• To replace (overwrite) the settings of the User Pro-
gram you have been editing, press the [SET] register.
• To save the new version to a different User Program
memory, press the assigned treble register (once or
twice), then press [SET].
Your settings are saved to the selected User Program
memory.
6.
Press the [USER PROGRAM] button again to
leave this mode.
The USER PRG indicator below the display goes dark
to indicate that the FR-1x is no longer in User Pro-
gram mode. At this point, the FR-1x returns to the
settings you were using before selecting User Pro-
gram mode, and the display once again shows the
main page.
NOTE
While the USER PRG indicator below the display flashes,
you can select another Set.
r
V-Accordion
Saving your settings (User Program)
39