Securing The Adapter And/Or Midi Cable - Roland V-Accordion FR-1x Owner's Manual

FR-1x V-Accordion
Before you start playing
Securing the adapter and/or MIDI
cable
Proceed as follows to ensure that the adapter cable –or
a MIDI cable– doesn't come loose while you are play-
ing.
Your FR-1x comes with an adapter and an attachment
strip that allows you to secure the adapter cable and
optional MIDI as well as audio cables to the right strap.
1.
Prepare the adapter cable and the attach-
ment strip as follows:
Be sure to attach the strip before the ferrite core on
the adapter cable. If you like, you can also add the
MIDI cable and audio cables to this assembly.
2.
Secure the attachment strip as shown in the
illustration, making sure that the ferrite
core cannot slide out of the loop.
Ferrite core
3.
Hold the adapter cable close to the right
strap and wind the attachment strip around
it as shown.
The strip is fitted with a Velcro layer that holds it in
place.
20
4.
Keep winding the attachment strip around
the strap until your assembly looks as fol-
lows:
5.
Reverse these steps to remove and discon-
nect the adapter and/or MIDI and audio
cables when you want to stop playing.