Switching The Power On And Off; Using Headphones - Roland V-Accordion FR-1x Owner's Manual

Switching the power on and off

NOTE
Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/
or damage to speakers and other devices.
NOTE
Always make sure the volume is turned down before switch-
ing on the power. Even with the volume all the way down,
you may still hear some sound when the FR-1x is switched on,
but this is normal and does not indicate a malfunction.
Turning on the power
1.
Turn the [VOLUME] knob all the way
towards the small dot to minimize the vol-
ume.
If you connected the FR-1x to an amplifier, etc., set
its volume to the minimum value as well.
2.
To switch the FR-1x on, press the [POWER]
button.
The [POWER] button lights.
NOTE
This unit is equipped with a protection circuit. A brief inter-
val (a few seconds) after power up is required before the
unit will operate normally.
3.
Turn the [VOLUME] knob clockwise to set
the volume to an appropriate level.
4.
Adjust the volume of the receiving audio
device (if connected).
Turning off the power
1.
Turn the [VOLUME] knob all the way
towards the small dot to minimize the vol-
ume.
If you connected the FR-1x to an amplifier, etc., set
its volume to the minimum value as well.
2.
Press the FR-1x's [POWER] button (its indi-
cator goes dark).
NOTE
This unit has a function that automatically switches off
the power after a certain amount of time has passed
without any buttons being operated.
You can disable this function. See "Auto Off" on p. 55.

Using headphones

The FR-1x has one jack for plugging in headphones.
This allows you to play without having to worry about
bothering others around you, even at night.
1.
Plug the headphones into the [PHONES] jack
located on the FR-1x's connection panel.
NOTE
Use stereo headphones. Please use only Roland head-
phones. Headphones from other manufacturers may be
unable to provide sufficient volume.
NOTE
The FR-1x's speakers are switched off when you connect
headphones. In that case, the SPEAKER OFF indicator lights.
See also "How to read the display" on p. 22.
2.
Use the FR-1x's [VOLUME] knob to adjust
the headphone volume.
r
V-Accordion
Switching the power on and off
21