Jeep Wrangler Owner's Manual page 33

Hinge Pin Screw
3. Unplug the wiring harness connector under the instru-
ment panel by pressing the tab at the side of the
connector and pulling to disconnect.
NOTE: If the red latch on the connector is locked, push
the red latch to the right until you can only see the latch
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31
on one end (right) of the connector. This will unlock the
connector tab, allowing the tab to be pressed down and
enabling the harness to be disconnected.
Door Strap/Harness Location
1 — Harness Connector
2 — Body Hook
3 — Door/Harness Strap
2