Jeep Wrangler Owner's Manual page 210

208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
13. The swing gate brackets do not need to be removed
unless the hard top is being installed. To remove the
swing gate brackets, pull the front of the bracket forward
while rolling the entire bracket back in toward the vehicle
to disengage.
14. Completely release the latches from the loops on the
windshield frame. If your vehicle is not equipped with
the Sunrider package, proceed to Step 15.
15. Make sure the plastic sleeves are slid rearward over
the Sunrider link (Sunrider Models only).