Doors; To Exit Remote Start And Drive; To Exit Remote Start Without Driving - Jeep Wrangler Owner's Manual

To Exit Remote Start Mode Without Driving The
Vehicle
Press and release the REMOTE START button one time,
or allow the engine to run for the entire 15-minute cycle.
NOTE: To avoid unintentional shut downs, the system
will disable the one time press of the REMOTE START
button for two seconds after receiving a valid Remote
Start request.
To Exit Remote Start Mode And Drive The Vehicle
Before the end of the 15-minute cycle, press and release
the UNLOCK button on the RKE transmitter to unlock
the doors and disarm the Vehicle Security Alarm (if
equipped). Then, insert the key into the ignition switch
and turn the switch to the ON/RUN position.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29
NOTE: The ignition switch must be in the ON/RUN
position in order to drive the vehicle.

DOORS

CAUTION!
Careless handling and storage of the removable door
panels may damage the seals, causing water to leak
into the vehicle's interior.
2