Section Ii. Getting Ready To Sew; Connecting Machine To Power Supply; Before Using Your Sewing Machine; Operating Instructions - Janome Sewing Machine Instruction Book

e
q
r
w
y
u

Operating Instructions:

The symbol "O" of a switch indicates the "off" position of
a switch.
For appliances with a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
r
w
t
q
e

SECTION II. GETTING READY TO SEW

Connecting Machine to Power Supply

Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
Using the start/stop button
q Machine socket
w Power supply plug
e Power switch
r Machine plug
1. Turn off the power switch e.
2. Insert the machine plug r into the machine socket q.
3. Insert the power supply plug w into the outlet.
4. Turn on the power switch e
Using the foot control
q Foot control plug
w Machine socket
e Power supply plug
r Power switch
t Machine plug
y Foot control
u Red mark
1. Turn off the power switch r.
2. Insert the foot control plug q, and machine plug t
into the machine socket w.
3. Insert the power supply plug e into the outlet.
4. Turn on the power switch r.
CAUTION:
Do not pull the foot control cord beyond the red mark u.
NOTE:
The start/stop button does not work when the foot control
is connected.
When the machine is turned on, the
one second, and the indicator window will show

Before Using Your Sewing Machine

Before using your sewing machine for the first time,
place a waste fabric under the presser foot and run the
machine without thread for a few minutes. Wipe away
any oil which may appear.

For Your Safety

* While in operation, always keep your eyes on the
sewing area. Do not touch any moving parts such as
the thread take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
- When attaching or removing any parts.
- When cleaning the machine.
* Do not place anything on the foot control, when not
sewing.
4
mark is lit after
.