Repeatedly Recording The Same Region (Loop Recording) - Boss MICRO BR Owner's Manual

8.
Play back the song, and use the INPUT
LEVEL dial to adjust the volume of the
input source.
Listen and compare the input source with
the track to be re-recorded, and adjust the
INPUT LEVEL dial so that there is no
difference in volume.
9.
Move to a location slightly earlier than the
point at which you want to begin re-
recording.
10. Press
to enter the recording
standby condition, and then press
.
Recording will begin automatically at the
point you specified as the punch-in location.
When you reach the punch-out point, you
will automatically return to playback.
11. When you've finished recording, press
to stop.
12. Return to a time location where you
began recording, and then play back.
Listen to the re-recorded result.
Section 1. Recording and playing back
Repeatedly recording the
same region (Loop Recording)
The Repeat function (p. 43) lets you repeatedly
play back a specified region (the loop region).
If you use the Repeat function in conjunction
with auto punch-in/out, the recorded result will
be played back immediately.
If you're not happy with your recording, you can
continue re-recording simply by pressing
"Loop recording" refers to the method of using
the Repeat function in conjunction with auto
punch-in/out to record repeatedly.
In the following example, we'll re-record a
portion of track 1 which you recorded earlier.
For details on how to specify the region to be re-
recorded (the punch-in/out points), refer to the
preceding section "Auto punch-in/out."
1.
Specify the punch-in and punch-out
points as described in steps 1–2 of
"Playing back repeatedly (Repeat) (p.
43)".
2.
Press [TR3] (R&A).
The region you specified will be the auto
punch-in/out region. In the display,
, and "A.PUNCH" will be lit.
One measure before and after the punch-in/
out region will be automatically specified as
the repeat region.
fig.01-240
Playback Recording
1 meas.
Punch-In
Repeat start point
(A)
3.
Press one of the [TR1]–[TR4] buttons.
4.
Use CURSOR [
Rec Track screen.
Repeat
Playback
1 meas.
Time
Punch-Out
Repeat end point
(B)
][ ] to access the
.
,
47