Boss MICRO BR Owner's Manual page 72

Section 3. Using effects
Bright
(with JC-120, CLEAN, CRUNCH, BLUES, BG
LEAD)
Turns the bright setting on/off.
SPEAKER SIM (SP)
This simulates the characteristics of various types
of speakers. When the output of the MICRO BR is
connected directly to a mixer, etc., this can be
used to create the sound of your favorite speakers
system.
On/Off
This parameter turns the speaker simulator effect
on/off.
Type
Selects the type of speaker that will be simulated
(→ See following table).
"On Mic" simulates the sound when a dynamic
Type Cabinet
SMALL Small open-back enclosure 10 inch
MIDDLE Open-back enclosure
JC-120 Open-back enclosure
TWIN Open-back enclosure
twin Open-back enclosure
MATCH Open-back enclosure
match Open-back enclosure
VO DRV Open-back enclosure
vo drv Open-back enclosure
BG STK Large Sealed enclosure
bg stk Large Sealed enclosure
MS STK Large Sealed enclosure
ms stk Large Sealed enclosure
METAL Large dual stack
72
OFF, ON
Parameter
OFF
ON
microphone is used, and "Off Mic" simulates the
sound when a condenser microphone is used.
Mic Set
This simulates the microphone position.
"CENTER" simulates the condition that the
microphone is set in the middle of the speaker
OFF, ON
cone. "1–10 cm" means that the microphone is
moved away from the center of the speaker cone.
Mic Level
Adjusts the volume of the microphone.
Dir Level
Adjust the volume of the direct sound.
Speaker Unit Microphone
Setting
On Mic
12 inch On Mic
12 inch (two units) On Mic
12 inch (two units) On Mic
12 inch (two units) Off Mic
12 inch (two units) On Mic
12 inch (two units) Off Mic
12 inch (two units) On Mic
12 inch (two units) Off Mic
12 inch (two units) On Mic
12 inch (two units) Off Mic
12 inch (two units) On Mic
12 inch (two units) Off Mic
12 inch (two units) Off Mic
Explanation
Bright is not used.
Bright is switched on to create a lighter
and crisper tone.
CENTER, 1 – 10 (cm)
Comments
Roland JC-120 Simulation
A setting suitable for CLEAN
A setting suitable for CLEAN
A setting suitable for MATCH
A setting suitable for MATCH
A setting suitable for VO DRV
A setting suitable for VO DRV
A setting suitable for BG STK
A setting suitable for BG STK
A setting suitable for MS
A setting suitable for MS
0 – 100
0 – 100