Connecting Via A Usb Cable; Required Items; Connecting Your Equipment; Making Connections - Roland INTEGRA-7 Editor Owner's Manual

Connecting Via a USB Cable

Required Items

If you're connecting via a USB cable, you'll need the following items.
• INTEGRA-7
• Apple iPad Camera Connection Kit (Camera Connector, made by Apple Inc.)
• USB cable (type-A male – type-B male: commercially available)

Connecting Your Equipment

1. Connect the Apple iPad Camera Connection Kit (Camera Connector,
made by Apple Inc.) to the iPad.
2. Use a USB cable (commercially available) to connect the USB
connector of the Apple iPad Camera Connection Kit to the
INTEGRA-7's USB COMPUTER port.

Making Connections

INTEGRA-7 settings
1. Press the [MENU] button.
2. Choose "System,"
and press the
3. Choose the "SETUP" tab.
4. Set the "USB Driver" parameter to
[ENTER]
button.
"GENERIC (MIDI only)."
5. Hold down the [SHIFT] button and press the
the system settings.
6. Restart the INTEGRA-7.
MEMO
The saved system settings will take effect when you restart the INTEGRA-7.
Settings in INTEGRA-7 Editor for iPad
1. In the upper right of the screen, tap the
The setup screen (p. 4) will appear.
2. Set the device ID to the same setting as on the INTEGRA-7. (By
default, this will be 17.)
Checking the device ID of the INTEGRA-7
Note the value shown under [MENU]
3. Choose the INTEGRA-7 as the MIDI device.
4. Tap somewhere other than in the setup screen.
The setup screen will disappear.
5. Press the [READ] button (p. 10).
The current parameter settings of the INTEGRA-7 will be read in, and all
parameters of INTEGRA-7 Editor for iPad will be updated.
MEMO
When you connect the INTEGRA-7 sound module to
INTEGRA-7 Editor for iPad, tap the
settings.
5
[EDIT] button to save
[ ]
button.
"System" "MIDI" tab Device ID.
[READ]
button first to synchronize the