Part View - Roland INTEGRA-7 Editor Owner's Manual

Part View

Here you can view or edit each part's sound name, volume, pan, effect, MIDI channel, and mute settings.
Tone information
Item Explanation
PART
Indicates the part number.
TYPE Indicates the type of tone.
BANK Indicates the tone bank.
CATEGORY Indicates the tone category.
Part parameters
You can edit the following parameters by dragging the
corresponding item in the screen.
Parameter Explanation
LEVEL Specifies the part's volume.
PAN Localizes the part's sound.
CHORUS
Specifies the chorus send level.
REVERB Specifies the reverb send level.
CH Specifies the MIDI channel.
Parameter Explanation
MUTE
Switches mute on/off each time you touch this.
Part parameter
Parameter Explanation
TONE Touch a tone name in the screen to access the tone select screen.
Tone Select screen
You can view the tone list by category or by bank. Use the
to switch between views.
Tone list shown by category
Button
[BY CATEGORY]
[BY TONE & BANK]
Tap a tone name in the tone list to select it, and then tap the
12
[BY CATEGORY] button and
Tone list shown by bank
Explanation
Shows the tone list organized by category.
When you select a category icon in the left side of the screen, the
right side will show a list of tones in the selected category.
Shows the tone list organized by bank.
When you select a bank icon in the left side of the screen, the right
side will show a list of tones in the selected bank.
[Close]
button to close the Tone Select screen.
[BY TONE & BANK] button