Supernatural Synth Tone Edit - Roland INTEGRA-7 Editor Owner's Manual

SuperNATURAL Synth Tone Edit

The SuperNATURAL Synth Tone Edit screen is organized as follows.
Partial SW
Turn each partial on/off.
Button Explanation
This partial is on.
This partial is off.
Partial SELECT
Select the partial that you want to edit.
Button Explanation
This partial is being edited.
This partial is not being edited.
Common
Here you can switch among parameters to be edited, and make settings for parameters that are common to the entire Synth Tone.
Parameter name and value
This shows the name and value of the
most recently edited parameter.
* The explanations in this manual include illustrations that depict what should typically be shown by the display.
Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer sounds), so what you actually see in the display may not
always match what appears in the manual.
Setup button
Displays INTEGRA-7 Editor for iPad's setup screen (p. 4).
14
Parameters
Here you can edit the Synth Tone
parameters (p. 15).
CATEGORY
This shows the category of the tone.
Parameter select tabs
Use these to switch between types of
parameter that you want to edit.
COMMON parameters
These parameters are common within the
layer that you're editing.